Siglent SDS2000X Series [SDS2104X] 100MHz 4-Ch Digital Oscilloscope

The Siglent’s SDS2104X is a 100MHz 4-channel Digital Oscilloscope builds on the success of its predecessor the SDS2104, with improved screen refresh rate (140,000 wfm/s normal mode, up to 500,000 wfm/s sequence mode), much larger waveform memory, faster sampling (2GSa/s) and simpler operation.  Most commonly used functions can now be accessed with a user-friendly one-button design.  The SDS2104X includes a new, improved version of SPO “Super Phosphor”  technology, and an innovative digital trigger system with high sensitivity and low jitter.  As well as a 256-level intensity grading display function, it includes but a color temperature display mode to show even more signal information. The trigger system supports multiple powerful triggering modes including serial bus triggering. History waveform recording and sequence acquisition allow for extended waveform records to be captured, stored, and analyzed. Also included is an impressive array of measurement and math capabilities.

Available options include a 25 MHz arbitrary waveform generator, 16 digital channels (MSO), as well as serial decoding.

---

Features:

---

• Bandwidth: 100 MHz
• Channels: 4 CH
• Real time sampling rate: 2 GSa/s
• Waveform capture rate up to 140,000 wfm/s (normal mode), and 500,000 wfm/s (sequence mode)
• Supports 256-level intensity grading and color temperature display
• Record length up to 140 Mpts
• Digital trigger system
• Intelligent trigger: Edge, Slope, Pulse, Window, Runt, Interval, Dropout, Pattern and Video (HDTV supported)
• Serial bus triggering and decoder, supports protocols IIC, SPI, UART, RS232, CAN and LIN (Optional)
• Low background noise, supports 1 mV/div to 10 V/div voltage scales
• 10 types of one-button shortcuts, including Auto Setup, Default, Cursors, Measure, Roll, History, Display/Persist,

      Clear Sweeps, Zoom and Print

• Segmented acquisition (Sequence) mode divides the maximum record length into multiple segments (up to

      80,000), according to trigger conditions set by the user. The resulting acquisition has a very small dead time
      segment.

• History waveform record (History) function, the maximumr ecorded waveform length is 80,000 frames
• Automatic measurement function on 37 parameters, supports statistics, Gating measurements, Math

      measurements, History measurements and Ref measurements

• Math function (FFT, addition, subtraction, multiplication, division, integration, differential, square root)
• High Speed hardware based Pass/ Fail function
• 16 Digital channels (MSO option), Maximum waveform capture rate up to 500 MSa/s, Record length up to 140

      Mpt/CH

• 25 MHz function/arbitrary waveform generator, built-in 10 types of waveforms (option)
• Large 8 inch TFT-LCD display with 800 * 480 resolution
• Multiple interfaces: USB Host, USB Device (USBTMC), LAN (VXI-11), Pass/Fail, Trigger Out
• Supports SCPI remote control commands
• Supports Multi-language display and embedded online Help

---

What's In The Box:

---

• (1) USB Cable
• (4) Passive Probe 
• (1) Power Cord 
• (1) CD (Including User Manual and EasyScopeX software) 
• (1) Quick Start 
• (1) Certification 
• (1) Certificate of Calibration 

---

Brochure/Datasheet

---

Instruction manual

---

Note: Prices are not binding , subject to change without prior notice